Image 1 of 6
Image 2 of 6
Image 3 of 6
Image 4 of 6
Image 5 of 6
Image 6 of 6
Printing Tips
Multi-color printer not required, you can print each part separately.
Only the top blob shell requires supports. Everything else can be printed without supports. The Insert of the blob make a red color and the outside yellow to give a temperature transition effect.
Superglue and some magnets are required. You may need to glue the magnets. Make sure all magnets are facing the same direction when you install them. I also suggest you glue them one at a time as the magnets in close proximity can come out of the hole and you don't want flying superglue everywhere. Ask me how I know. :) These are the magnets I used https://amzn.to/46xsvLS and some dollar store super glue.
When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.