Geometric Lamp & Shade - Commercial License
Geometric Lamp with Shade. This Lamp prints with supports on the base. You need only minimal supports for the top. Print slowly with a lot of cooling for the best look.
This model, when purchased comes with commercial usage rights.
Printing Tips
.16 Layer height gives a really nice look to the outside. Large heights will just disappoint you. Go slow. Fast speeds just give you bad corners.
To get the multicolored shade effect I use, simply swap filament 8mm in and 8mm before the end. With the Bambu this is easy but 3 filament swaps will work with any FDM printer. Just change filament appropriately.
You will need a traditional "Lamp Kit" to complete the project with a harp. Something like https://amzn.to/3ZCfde0 works well. You'll need approximately 180mm of tube length and the cover can be adjusted by adjusting its Z-Height but the default 165 looks the Best IMHO. Use washers and nuts to hold the rods to the base.
When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.