tools Collection
This Emergency Stop Button Module allows you to use a standard power inlet and a standard outlet with a emergency stop button in the middle. This works great for 3D Printers, Lasers or any number of power tools. You can use this for just about anything electrical being mindful not to exceed the 10a rating of devices plugged into it.
This model is NC-ND-AI [Read Model License Terms]
This magnet looks like a USMC Kabar knife sticking into your refrigerator and is great when you want someone to remember to pick up something from the store.
This model is NC-ND-AI [Read Model License Terms]
Some soldering fingers I put together for the LayerFused X301 build video. These work great with various sized wires.
This model is NC-ND-AI [Read Model License Terms]
Another Bambu Labs X1C Waste Bin. This one however has a see through window allowing you to see if it needs to be emptied at a glance. There are two sizes included here, a smaller one for space saving and those of you who don't run a lot of filament swaps, and an XL which will give you considerably more space and should handle most prints.
The see through window works by sliding through 3 microscope slides https://amzn.to/44Qmed7 (the ones I used) into the slot on the bin. You can alternatively take a 2L plastic bottle and cut an appropriate window, but the glass looks amazing.
This model is NC-ND-AI [Read Model License Terms] and can be used only for personal use without modifications. If you are interested in a commercial license that allows you to print and sell these you’ll need to purchase the See Through Bambu X1C Waste Bins model listed below.
This is a flag clip that will keep your flag attached to the rod and keep it from moving. My wife had lost one of the flags she had and asked if I could create something to keep it in place. This works perfectly. I printed these in TPU however you could easily use PLA as well. The TPU has the added flexibility so they seemed to hold on quite well. The rod is a 5mm rod that they attach to. You can easily resize these large or smaller in the slicer to fit your flag rod.
This model is NC-ND-AI [Read Model License Terms]
These files go with the DIY Laser Engraver Video series by MakersMashup. You can use whatever diode laser you like for this build and can easily modify the mount in tinkercad. STEP and other files will be available soon for download as this is an open source project.
Part 1 https://www.youtube.com/watch?v=EiLW0ShoJSo
Part 2 https://www.youtube.com/watch?v=jlRYsr-DPnw
This model is NC-ND-AI [Read Model License Terms]
When you need to restrain your droid or even a piece of paper on the fridge this restraining bolt will get the job done. Prints with minimal infill and a color swap mid way gives the right effect for the restraining bolt. I've also included "Luke's List" for your entertainment as well.
This model is NC-ND-AI [Read Model License Terms]
This is a very minimalist DIY Fume Extractor. You only need a few parts to put this together. The prints should take about 3 hours total to print everything and then you can assemble it. The assembly video is here https://youtu.be/IyjuDWjKk_U
This model is NC-ND-AI [Read Model License Terms]
Tired of digging through the change tray in your car for a quarter? Problem solved with this quick 5 minute print! Print a few of these, put them on your keychain and take them when you run out of quarters for the carts at the popular German grocery store.
This model is NC-ND-AI [Read Model License Terms]
Do you have one of these awesome ThirdReality pushbutton switches as part of your home automation? Broken the button that holds them to the switch? Cant find a replacement!
PROBLEM SOLVED!
This model is NC-ND-AI [Read Model License Terms]