organizers Collection
This is an 8 slot Batter Case for they very common 5V USB Batteries you find in discount stores. These batteries hold a good charge and are great for mobile sensors, charging phones, etc. This holder allows you to store charged batteries ready for replacement at any time.
This model is NC-ND-AI [Read Model License Terms]
Spring clean and organize your batteries. An easy to print Rechargeable Battery Case that prints in a few hours. This was printed with 0% infill. Your printer should easily bridge the top spaces.
This fits common "Rounded" USB rechargeable batteries.
This model is NC-ND-AI [Read Model License Terms]
TinCognito - Mini Survival Kits upcycling Altoids Tins. The TinCognito shell helps keep the tin closed and makes it easy to identify the contents.
See it in action here: https://youtu.be/n5_aQ29rqwE
This model is NC-ND-AI [Read Model License Terms]
A fun little container, tip jar or other fun for your star wars collection. I use mine to store jumper wires but you can use it for anything! Scale in the slicer for whatever size you want! I originally built this to hold some jumper wires but 200% makes a great remote control holder!
Check out more Star Wars designs here: https://thangs.com/designer/Makers%20Mashup
This model is NC-ND-AI [Read Model License Terms]
This is a battery holder for 20 1S Lipo batteries. This is perfect for whoop 1s batteries in the 300-700mah range. Have plenty of batteries ready. Print one for charged and discharged batteries. Fits nice and neatly into your drone go bag.
This model is NC-ND-AI [Read Model License Terms]
Behold the "Cheezy Pen Holder" – the wedgiest and wittiest desk accessory you'll ever need! Crafted with the precision of a cheese connoisseur and seasoned with just the right amount of humor, this 3D model promises to add a dash of gouda goodness to your workspace.
Looking for the perfect spot to park your pens? Say cheese! This delightful pen holder is shaped like a wedge of Swiss cheese, complete with the iconic holes that are practically begging for your pens to dive right in like cheese divers at the Olympics.
Picture this: your pens nestled in the embrace of Swiss holes, like they're on a relaxing vacation in the Swiss Alps, sipping cheese fondue by the fire. It's a taste of pen holder paradise that's sure to leave your colleagues cheddar with envy!
But wait, there's a twist that's sharper than a cheddar knife! The "Cheezy Pen Holder" doesn't just hold your pens; it holds the cheesiest writing utensils you can find! From pens with pun-tastic names like "Brie-lly Awesome" to "Cheesus Saves," this holder is the mecca of cheesy wordplay.
So, if you're ready to bring some wit and clever humor to your workspace, the "Cheezy Pen Holder" is your prime choice. It's the Swiss army knife of pen holders – practical, stylish, and full of cheesy charm. Get yours now, and let the puns flow like a never-ending cheese fountain!
Get ready for a desk that's more entertaining than a stand-up comedy show and cheesier than a pizza commercial. With the "Cheezy Pen Holder" by your side, every day will be a cheddarific adventure! Embrace the wedge, embrace the puns, and embrace the laughter! 🧀😄
This model, when purchased comes with commercial usage rights.
TinCognito - Mini Survival Kits upcycling Altoids Tins. The TinCognito shell helps keep the tin closed and makes it easy to identify the contents.
See it in action here: https://youtu.be/n5_aQ29rqwE
This model is NC-ND-AI [Read Model License Terms]
TinCognito - Mini Survival Kits upcycling Altoids Tins. The TinCognito shell helps keep the tin closed and makes it easy to identify the contents.
See it in action here: https://youtu.be/n5_aQ29rqwE
This model is NC-ND-AI [Read Model License Terms]
Here is a fun little tip jar that has the Republic Credit Symbol on it and says "Tips" in Aurebesh below.
Check out more Star Wars designs here: https://thangs.com/designer/Makers%20Mashup
This model is NC-ND-AI [Read Model License Terms]
This is a simple Desiccant container that fits into filament spools for storage or printing. The container is unique in that it uses a spiral and overhangs to print the openings for the desiccant. This reduces the retraction count considerably over other designs meaning you can print the entire container in under 45 minutes on a Bambu X1C or similar.
Two different lids are included, one for spool use and one for general use.
This model is NC-ND-AI [Read Model License Terms]
This is a zero infill marker holder / marker stand for common permanent makers 13mm or smaller diameter.
This model is NC-ND-AI [Read Model License Terms]
TinCognito - Mini Survival Kits upcycling Altoids Tins. The TinCognito shell helps keep the tin closed and makes it easy to identify the contents.
See it in action here: https://youtu.be/n5_aQ29rqwE
This model is NC-ND-AI [Read Model License Terms]
TinCognito - Mini Survival Kits upcycling Altoids Tins. The TinCognito shell helps keep the tin closed and makes it easy to identify the contents.
See it in action here: https://youtu.be/n5_aQ29rqwE
This model is NC-ND-AI [Read Model License Terms]
These models can be seen in action here https://youtu.be/46dk_y27HCs
This bag hanger comes in various block sizes but uses the same clips. The 3D Print uses a chamfer so even an uncalibrated printer should be successful in printing these. Use horizontal expansion to reduce the hook size if you find its too tight to press into the block. Most printers wont have any problem with default slicer settings.
The bag hangers allow you to take any zipper based plastic bag and hang it up on a pegboard or hook. Organize your workshop, garage or classroom with these bag hangers. You can watch an entire video on how these bags can be used for anything and a single hanger can hold 4 pounds or more!
This model is NC-ND-AI [Read Model License Terms]
These models can be seen in action here https://youtu.be/46dk_y27HCs
This bag hanger comes in various block sizes but uses the same clips. The 3D Print uses a chamfer so even an uncalibrated printer should be successful in printing these. Use horizontal expansion to reduce the hook size if you find its too tight to press into the block. Most printers wont have any problem with default slicer settings.
The bag hangers allow you to take any zipper based plastic bag and hang it up on a pegboard or hook. Organize your workshop, garage or classroom with these bag hangers. You can watch an entire video on how these bags can be used for anything and a single hanger can hold 4 pounds or more!
This model is NC-ND-AI [Read Model License Terms]
TinCognito - Mini Survival Kits upcycling Altoids Tins. The TinCognito shell helps keep the tin closed and makes it easy to identify the contents.
See it in action here: https://youtu.be/n5_aQ29rqwE
This model is NC-ND-AI [Read Model License Terms]
Print multiple copies of this filament rack and then use a wooden dowel on the front and back to support the filament. PVC may also be used. If you encounter bowing in the dowel or PVC just print another mount and place it in the middle.
This model is NC-ND-AI [Read Model License Terms]
The Stacking Filament Swatch System enables you to quickly catalog your filaments. Use a simple DYMO Handheld labeler (or similar) to quickly mark your samples with the filaments you use.
The 4UP pre-painted AMS file allows you to load in 4 rolls of filament and print 4 samples in around 20 minutes. Each sample prints in entirety for only 4 color swaps. Get your catalog built fast.
Print as many levels and trays as you like. A Blank one is also included so you can easily add the vendor name with Bambu's slicer. The base and lid simply go on the bottom and top and make the entire unit easy to transport. The trays remove so you can easily display your swatches to customers .
This model is NC-ND-AI [Read Model License Terms]